Honda Ridgeline Oil Change — Cost, Oil Type & How-To
Last updated: October 2026
| Where | Cost | Notes |
|---|---|---|
| Dealership | $75-110 | OEM oil + filter, inspection included |
| Independent shop | $55-85 | Often cheaper, same synthetic |
| DIY (parts only) | $40-60 | Oil + filter, you supply labor |
Oil type & capacity by engine
| Engine | Capacity (with filter) | Oil type |
|---|---|---|
| 3.5L V6 | 5.7 qt (5.4 L) | 0W-20 synthetic |
Capacities are for a drain-and-fill with filter replacement. For a specific model year, see the Ridgeline oil capacity by year table.
How to change the oil (DIY)
- Warm the engine for 2-3 minutes so the oil drains faster, then park on level ground and engage the parking brake.
- Locate the drain plug under the oil pan, place a drain pan beneath it, and loosen the plug with the correct socket.
- Let the old oil drain fully (5-10 minutes), then remove and replace the oil filter, lightly oiling the new filter's gasket first.
- Reinstall the drain plug to the specified torque (do not overtighten), then add the specified amount of new oil through the filler cap.
- Run the engine briefly, check for leaks, wait a few minutes, and confirm the level on the dipstick before driving.
How often?
On full synthetic, Honda typically specifies up to 10,000 miles or 12 months between changes under normal driving, halved for severe conditions. Read more in our oil change intervals guide.
FAQ
How much does a Honda Ridgeline oil change cost?
Expect $75-110 at a dealer, $55-85 at an independent shop, or $40-60 in parts for a DIY change. Prices vary by region and oil brand.
What kind of oil does a Honda Ridgeline take?
It uses 0W-20 synthetic. Capacity is 5.7 qt (5.4 L) with a filter change.
How often should a Honda Ridgeline get an oil change?
On full synthetic, the normal interval is up to 10,000 miles or 12 months; cut that roughly in half for severe driving (short trips, towing, dusty or extreme conditions). See our oil change intervals guide.
Can I change the oil on my Honda Ridgeline myself?
Yes. A DIY change costs about $40-60 in parts and takes 30-45 minutes with basic tools. Follow the steps above and torque the drain plug correctly.